There were 99 representatives from 41 different producers among the 386 registered delegates from a total of 49 different countries. There were also 86 registrations representing 41 different raw material suppliers.

At the opening of the conference, Ioannis Manessis, chairman of IREPAS, said that two major conflicts – one in Ukraine and the other in Iran — have consequences for global trade in general and serious repercussions for the industry in particular. He said steel trade has been affected by both demand destruction and supply disruptions, as well as by elevated energy costs, higher freight rates and the practical difficulty of securing vessels on time to transport materials.

Mr Manessis added that protectionism continues to intensify at the same time. IREPAS chairman also said that real demand in the global long products sector remains subdued while geopolitical tensions have driven up freight, energy, and raw material costs. Combined with some degree of inventory replenishment, this has supported higher prices he concluded.

On the last day of the conference, producers of long steel products, as well as traders and raw material suppliers, shared the conclusions reached at their special committee meetings regarding the current situation in the markets with the general participants at the event.

Raw Material Suppliers at IREPAS: Tighter supply, geopolitics reshape global scrap market

Speaking at the panel session, Jens Björkman from Stena Metal International and also chairman of the raw material suppliers committee, shared the committee’s assessments of the current dynamics and difficulties in the global raw material markets. Mr. Björkman highlighted significant shifts in global market dynamics over the past year, pointing to tighter supply conditions, changing trade flows and increasing geopolitical influence on pricing and demand. One of the key developments has been the slowdown in Chinese steel output, with March production falling to the lowest monthly level in six years. This decline, linked to weaker margins and stricter controls, has supported sentiment in other regions, while iron ore prices have remained relatively firm at $105-110/mt due to supply-side constraints. India continues to stand out as a major growth market, supported by strong domestic sponge iron production. This has reduced its reliance on scrap imports, although the country could be an attractive destination, based on freight costs and pricing conditions.

The chairman of the raw material suppliers committee stated that, in Europe, safeguard measures and regulatory frameworks have reinforced protectionist dynamics, supporting intra-regional scrap demand. However, concerns persist over high energy costs and the risk of stagflation, which could weigh on longer-term demand. In the United States, stronger domestic steel production has boosted internal demand for raw materials. At the same time, the attractiveness of scrap exports has declined, particularly for high-quality grades, as supply increasingly shifts toward domestic consumption.

Mr. Björkman pointed out that Turkey has seen improved sentiment, supported by stronger steel production and demand. Reduced semis supply from Iran has increased reliance on scrap imports, pushing prices to around $410/mt, an annual high. Rising freight costs, driven by higher bunker fuel prices and disruptions of oil shipments through the Strait of Hormuz, have further supported pricing.

Mr. Björkman emphasized that there is no global surplus of scrap supply, as scrap continues to be steadily consumed. Europe exports around 19-20 million mt annually, reflecting limited domestic demand growth, but future availability may tighten due to increasing EAF adoption and regulatory constraints. Traditional importers in the Middle East may face challenges as scrap availability tightens in Europe and the US. Meanwhile, he noted, growing scrap generation and processing capacity in Asia, particularly in China and India, could gradually reshape global trade flows.

Mr. Björkman said that increasing regulatory requirements, particularly EU waste shipment rules, are expected to drive investment in sorting and processing. At the same time, tighter credit conditions and reduced availability of trade finance are adding complexity to global scrap trade. He went on to say that, despite strong pricing and demand conditions, the market outlook remains uncertain. Energy prices, economic growth and geopolitical developments continue to pose risks, while elevated oil prices at around $110 per barrel are still considered manageable for now. However, in conclusion, he commented that any deterioration in demand or purchasing power could quickly shift the market into a more challenging phase.

Traders at IREPAS: Geopolitical tensions and higher costs disrupt steel trade flows

Speaking during the panel session, Wilhelm Alff, director at Duferco and chairman of the traders committee, shared the committee’s assessment of current market conditions, highlighting weakening demand, regulatory pressures and rising geopolitical risks. Mr. Alff reminded that crude steel production in China reached around 960 million mt in 2025, while data from the first quarter of 2026 indicate that output may decline further or at best remain stable, with no clear signs of growth. In China, the sharpest drop was observed in the rebar segment, in which production fell by 12 percent, reflecting the ongoing downturn in the construction sector. The only improvement in China was the growth of more than 10 percent in iron ore inventories, mainly due to strategic stock building, highlighting the disconnect between raw material positioning and weak end-user demand.

This weakness in demand is particularly evident in Europe, where the overall economic outlook remains poor. Public spending is increasingly being redirected toward defense and social support rather than infrastructure, especially in Germany, limiting the recovery potential for steel consumption. The committee also pointed out that existing production capacity in the EU continues to exceed demand, noting that even prolonged production stoppages by major producers have had little visible impact on the market. A key concern for traders remains the implementation of the EU’s Carbon Border Adjustment Mechanism (CBAM). The committee chairman emphasized that, in the current environment, traders are advised to use default emission values when calculating CBAM costs in order to avoid risks, although this approach increases cost exposure. Uncertainty surrounding calculation methods and verification procedures continues to complicate transactions, making it essential to involve producers and clearly define contract terms.

In addition, recent changes to the EU safeguard system have added further pressure. Quotas have been reduced by nearly 50 percent, while out-of-quota duties may rise to as high as 50 percent. Market participants criticized the lack of adjustment in country-specific quotas, even where suppliers have not delivered material for extended periods. As a result, portions of the quota system remain effectively unusable, further tightening supply and negatively affecting buyers and end-users in the region. Against this backdrop, traders also highlighted the growing impact of geopolitical tensions, particularly in the Middle East. According to Mr. Alff, escalating tensions have tightened raw material supply chains and pushed costs higher, significantly slowing trading activity. Mills are increasingly relying on short-term sourcing strategies and opportunistic cargoes, while additional costs for transporting billets overland from Omani ports are estimated at around $40/mt. Severe port congestion is further complicating trade flows, making execution increasingly difficult. Despite these disruptions, the committee believes that the current situation is still being treated as temporary rather than structural. However, logistical constraints, especially in key maritime routes, continue to limit cargo movements and add uncertainty to global trade.

Commenting on global trade flows, Mr. Alff noted that exporters are likely to face growing challenges in accessing traditional markets. Tightening EU quotas and rising protectionism are forcing suppliers to seek alternative destinations, though options are becoming increasingly limited as more countries introduce similar trade barriers. Africa is expected to remain a key growth market in the medium term, supported by rising imports from Asia, particularly China, although the expansion of local production capacity and potential protectionist measures could gradually slow this trend.

Regarding China, the committee expects semi-finished steel exports to remain at elevated levels but under tighter control, as the Chinese authorities are likely to manage trade flows more actively to avoid another sharp surge. While the ongoing crisis in the Gulf region could support demand for Chinese material, its impact will largely depend on logistical conditions and the ability to move cargoes efficiently.

Looking at other regions, market conditions in the US and Latin America were described as relatively stable, with the US benefiting from solid demand driven by public infrastructure projects.

Overall, the traders committee underlined that the global steel market is entering a period of heightened uncertainty, shaped by weak demand in key regions, regulatory changes and geopolitical risks. In such an environment, Alff concluded that it is extremely difficult to predict price trends, emphasizing that market participants will need to continuously monitor developments and adjust their strategies accordingly.

Producers at IREPAS: Global steel sector under pressure from costs and weak growth

Alex Gordienko, export director of Spain’s CELSA Group and representing the producers committee, stated, in sharing the producers committee’s findings, that the global steel industry is facing increasing pressure from rising costs, weak economic growth and regulatory complexity. He noted that uncertainty remains high, particularly due to ongoing geopolitical tensions. Mr. Gordienko indicated that raw material prices have risen significantly, while the ability to pass these costs on to customers remains limited. As a result, margins across the industry are under sustained pressure, with finished steel prices failing to fully reflect higher input costs.

Mr. Gordienko noted that economic growth remains subdued across many regions, limiting the potential for a meaningful recovery in steel demand. He warned that current conditions reflect a fragile balance, with demand holding but lacking strong momentum. He described energy markets as highly volatile, largely due to tensions in the Middle East, adding that there is no clear timeline for a resolution and that a prolonged conflict could significantly worsen market conditions.

Mr. Gordienko went on to state that trade policy remains a key theme, with the EU’s Carbon Border Adjustment Mechanism (CBAM) at the center of discussions.

CBAM is seen as a mechanism that will gradually level carbon costs globally, encouraging countries such as Turkey, China and India to develop their own carbon pricing systems.

He said that, while CBAM is not expected to trigger immediate price changes, producers anticipate a medium-term disruption. By 2027, mills with verified emissions data are expected to gain a competitive advantage, as buyers increasingly prioritize suppliers able to provide reliable carbon data. Currently, only a limited number of suppliers, particularly in Japan and South Korea, are fully prepared for these requirements.

Meanwhile, the other restrictive factor, he pointed out, is that a new quota system stricter than the EU’s framework is expected to be introduced in the UK.

Mr. Gordienko commented that logistical challenges are adding further pressure, particularly in the Middle East, where port congestion is disrupting cargo flows. Limited truck availability and rising freight costs, driven by higher bunker fuel prices and fuel shortages, are increasing delivery costs for producers. He also stated that production disruptions in Iran have significantly affected global semis supply. Publicly available information indicates that facilities representing around 10 million mt of capacity have been heavily damaged, with recovery timelines ranging from six to 12 months. Iran exported approximately 3 million mt of semis in 2025, with around 75 percent directed to Asia. The disruption has contributed to increased Chinese semi-finished exports, particularly in March, as China moved to fill the supply gap. In the meantime, diesel shortages in Europe and transportation constraints are further amplifying cost pressures, with freight rates rising faster than oil prices.

On the raw materials side, Gordienko stated that availability remains a structural constraint. European producers, heavily reliant on scrap for electric arc furnace-based production, face limited flexibility in switching to alternative inputs such as HBI due to high energy requirements. This suggests limited short-term changes in production routes.

Lastly, he shared his prediction regarding the market outlook. Despite relatively stable demand and pricing conditions, the overall outlook remains uncertain. In conclusion, he said that energy prices, geopolitical developments and cost pressures continue to pose significant risks, leaving the global steel industry in a fragile and unpredictable environment.

There were 123 representatives from 49 different producers among the 406 registered delegates from a total of 56 different countries. There were also 79 registrations representing 41 different raw material suppliers.

At the opening of the conference, Murat Cebecioglu, chairman of IREPAS, said that demand is still very weak in the global longs market and the situation remains difficult as mills are cutting back on production and protectionist measures are continuing full speed ahead, while China and other countries in Asia are exporting a lot, putting pressure on prices.

The IREPAS chairman added that there is very severe competition in the market, and every producer is fighting with its last penny in order to keep operating.

On the last day of the conference, producers of long steel products, as well as traders and raw material suppliers, shared the conclusions reached at their special committee meetings regarding the current situation in the markets with the general participants at the event.

Raw Material Suppliers at IREPAS: Global trade conditions are “devastating” due to uncertainty

Jens Björkman, the chairman of the raw material suppliers committee, said that, in the recent period, global trade conditions have been extremely difficult, describing the situation as “devastating” amid the current uncertainty. Pointing out that trade barriers and uncertainties continue to weigh heavily on the market, particularly with the US tariffs forcing some countries to find alternative destinations, he added that this shift has created pressure on other markets, including Turkey. Regarding the protectionism in the market, he stated that there are rumors that the EU will impose some duties on Asian materials due to the huge inflows of cheaper steel from the region. Meanwhile, noting that China, which is the main exporter of cheap steel, has signaled plans to reduce steel production and exports in 2025 and 2026, albeit the actual outcome remains uncertain, he said that, in the longer term, larger investments in EAF-based production are expected, supported by stable electricity supply and growing domestic scrap availability. China has also announced a cut of about 90 million metric tons in its steel production in 2025.

Highlighting that the planned green transition in the steel industry is increasingly being questioned, with many investments being cancelled and projects being delayed, Mr. Björkman stated that the EU’s move toward electric furnace-based production has now been postponed by at least three to four years. He underlined that, if carbon emission trading in Europe and the related pricing system are fully implemented, emission reduction technologies will need to be installed more widely. However, he said that, instead of hydrogen-based DRI, natural gas could be used in the short term. In addition, the raw materials committee chairman said EU waste shipment regulations treating scrap as waste will create more bureaucracy, especially for non-OECD countries needing formal approvals to buy European scrap, while OECD trade remains unaffected. Regarding the concerns over domestic scrap oversupply, he stated that Europe already faces excess supply overall, but certain grades like clean automotive scrap could face shortages. This imbalance, he explained, is why EU steel producers push to keep scrap within Europe.

Looking at Turkey, Björkman noted that the recent increase in freight costs has become a burden for suppliers, leading prices to increase slightly in Turkey, though how long this situation will last remains difficult to predict. Regarding the changes in Turkey’s inward processing regime, the committee chairman stated that Turkish mills, who are already struggling amid high costs, may become less competitive in the short term as scrap prices may increase slightly, leading the mills to reduce production.

Meanwhile, stating that raw material demand in the GCC market is expected to focus more on DRI/HBI, which remains limited in supply, he emphasized that larger volumes will be needed in Europe to support flat steel production and the green transition, though a mix of DRI/HBI and scrap is likely to be used.

Traders at IREPAS: Protectionist measures will continue for foreseeable future

F.D. Baysal, the chairman of the traders committee, said that China’s exports have increased at a much higher pace than its production. He stated that there are no expectations for production cuts in China and that its domestic stock levels remain at normal levels. In response to questions on how China is reacting to trade barriers, he explained that Chinese producers have begun investing in production facilities in other regions, including Africa and South America.

Looking at Turkey, Mr. Baysal said that the high cost of energy remains a key challenge for Turkish mills. He noted that, in order to save energy and comply with CBAM regulations, Turkish producers have started investing in solar and renewable energy sources, which are expected to reduce production costs. Meanwhile, saying that there are no clear plans in the EU to ease green transition requirements, though delays remain a possibility, he commented that CBAM will eventually be enforced, but significant work is still needed to establish reference levels for both European and overseas mills. He added that, despite uncertainties, European producers are already moving from blast furnaces to EAFs and investing in renewable energy sources such as solar to balance costs and meet future carbon requirements.

Commenting on protectionist measures, the committee chairman stated that the Trump administration’s tariffs, reaching 75-100 percent in some cases, have nearly halted steel imports into the US, while Canada and Mexico have also imposed strong protective measures, leaving the North American market heavily restricted. Stating that he believes that protectionist measures will continue for the foreseeable future, Baysal said that further barriers against cheaper Asian steel are likely, but stressed that free trade remains the best option, though current trends are moving in the opposite direction.

Regarding prices, he highlighted that the current spread between rebar and scrap prices stands at around $200 or slightly less. He suggested that this points to a likely regression in scrap prices. He also compared production methods, stating that blast furnaces currently hold a cost advantage of about $25/mt over electric arc furnaces as the latter depend on electricity prices, though these are lower in countries like the US. On freight, Baysal noted that container freight rates have come down from post-Covid highs of around $4,000 to about $1,200, adding that he does not expect them to fall further.

Producers at IREPAS: Chinese exports and protectionism squeeze global steel industry

Murat Cebecioglu, chairman of IREPAS and also chairman of the producers committee, said that, as demand is very limited, everybody is trying to protect what is theirs. “We can sell to the EU only once every three months because of the quota and it fills up as soon as the quota is opened. Because of China we cannot sell to many places. Chinese exports are hurting everyone,” he explained. The committee chairman pointed out that China is the main driver, exporting heavily at low prices, exerting pressure everywhere amid generally limited demand. Many countries are imposing protective measures not only on China but also on some other Asian countries, considering that the Chinese are quick to move their production elsewhere to avoid trade barriers.

Regarding Turkish mills’ capacity utilization rates, Mr. Cebecioglu pointed out that, under current market conditions, utilization rates are not at decent levels and, with protectionist measures still in place, Turkey has limited space to export, with only a few countries left, and competition is very tough in those countries. He also added that the countries to which Turkey used to export have become exporters themselves and this affects Turkish production in return. Turkey’s steel production capacity stands at around 60 million mt, but the country is currently producing just 38 million mt. In addition to trade measures, China is exporting heavily all around the world and, as it is difficult to give low prices to compete with the Chinese, in the end Turkish mills have to cut production, he remarked.

Commenting on China’s work plan for the steel industry in 2025-26, the IREPAS chairman underlined that the Chinese are always coming up with some kind of plan, but it is yet to be seen how much of it will be implemented and how they will proceed. This work plan, he noted, consists of many things; regulations, environmental constraints, shutting of inefficient mills, and technological upgrading for green steel and low carbon production. In the end, future competition will depend on being cleaner, he stressed. He also commented that, if this Chinese work plan goes through, it will mean that there will be export regulations, leaving room for Turkish mills to breath.

Talking about the mega projects in the GCC region, Cebecioglu said that demand is quite good in the region and GCC-based mills are also exporting to the EU and North African countries, where they are very competitive against the Turkish mills. As GCC mills have lower costs compared to Turkish mills, they have the upper hand in prices in terms of costs.

19:00 – 22:00                   Welcome cocktail at Athenaeum InterContinental Athens Hotel

Day 2: Monday, April 28, 2025

09:15 – 09:30                  Welcome address by Chairman of IREPAS

09:30 – 10:50                   SESSION ONE – Critical changes in the global long steel markets and macroeconomic overview

- Long products market outlook

Alexander Gordienko, Export Director, Celsa Group

- Macroeconomic Overview

Nikos Vettas, Professor, Athens University of Economics and Business / General Director, Foundation for Economic and Industrial Research

10:50 – 11:20                     Networking break

11:20 – 13:00                    SESSION TWO – Major factors effecting the markets

- Chinese steel market outlook

Su Changyong, Vice Chairman, Metallurgical Council of CCPIT / Deputy Secretary General, CISA / President, Metallurgical Industry Press

- Trump’s trade policy and EU reactions: what lies ahead for steel trade?

Matthew Nolan, Counsel, ArentFox Schiff LLP

Nikolay Mizulin, Partner and Co-leader of International Trade, Mayer Brown

Bulent Hacioglu, Managing Partner, Trade Resources Company

- The next phase of CBAM: preparing for 2026 and beyond

Jamie Mcleod, Senior Manager, Customs, Crowe U.K. LLP

13:00 – 14:30                    Networking lunch

14:30 – 16:30                    IREPAS Committee Meetings

• 14:30 – 16:30 IREPAS Producers Committee (by invitation only)
• 14:30 – 16:30 IREPAS Raw Material Suppliers Committee (by invitation only)
• 14:30 – 16:30 IREPAS Traders Committee (open to all attendees)

16:00 – 18:00                    Monday cocktail reception

Day 3: Tuesday, April 29, 2025

10:00 – 11:30                   SESSION THREE – Panel with Committee Chairmen

• IREPAS Producers Committee
• IREPAS Raw Material Suppliers Committee
• IREPAS Traders Committee

There were 140 representatives from 47 different producers among the 493 registered delegates from a total of 58 different countries. There were also 100 registrations representing 57 different raw material suppliers.

At the opening of the conference, Murat Cebecioglu, chairman of IREPAS, said that the supply and demand balance in the global long steel industry is becoming more and more unstable. Explaining that Chinese finished steel products are dominating most markets, he noted that the situation is close to what the market went through ten years ago and stressed that, if the Chinese continue in the same way, the global steel industry will suffer great damage.

The IREPAS chairman added that the markets are in a bearish mood and are holding back with a not so promising outlook.

On the last day of the conference, producers of long steel products, as well as traders and raw material suppliers, shared the conclusions reached at their special committee meetings regarding the current situation in the markets with the general participants at the event.

Raw Material Suppliers at IREPAS: Previous optimism for H2 postponed to 2025       

Jens Björkman, the chairman of the raw material suppliers committee, summarized the finding of the committee meeting on the general situation in the global steel and raw material markets, noting that the optimistic sentiments seen in spring this year for the second half of the year have been postponed until 2025. Emphasizing that iron ore prices are under pressure from lower production in China, he stated that slowing Chinese production could work in favor of the rest of the world in terms of reduced Chinese export volumes.

Looking at the EU, pointing out that scrap generation in the region has slowed down as the sales of downstream industries have decreased amid lower personal spendings in the region, the chairman of the raw material suppliers committee noted that the lower scrap generation in Europe has led to scrap prices being stable at higher levels. He also commented that business activity in Germany, which is the main driver in the EU, is slowing down even though the year started with improvements in the construction and housing industries, the positive effects of which will be seen on the raw material side until the end of the year.

Regarding the situation in Turkey, Björkman said that the country has postponed scrap purchases during summer and autumn this year due to competitive alternative options of semi-finished products from Asia, especially China. He added that he expects Turkey to continue to purchase imports of billets, slabs and HRC, thus negatively affecting scrap prices.

Traders at IREPAS: Competitive Chinese billets pull Turkish mills away from scrap       

Wilhelm Alff, chairman of the traders committee, stated that China’s exports have been increasing constantly, with the country’s average monthly exports trending at 5.6 million mt in 2022, at 7.7 million mt in 2023 and expected to be around 8.7 million mt in 2024. Noting that China has been exporting semi-finished and finished steel products heavily at competitive prices, he stated that any surge in protectionist measures in reaction to this would just provide short-term relief, only changing product flow.

The traders committee chairman stated that, given the attractive prices of Chinese material, especially billet, Turkish mills are expected to continue to buy Chinese billet as an alternative to higher-priced scrap, putting pressure on scrap prices.

Regarding iron ore, Mr. Alff stated that rebar production in China has decreased amid destocking due to the switch to the new rebar standard, resulting in lower demand for iron ore. He said that iron ore stocks at Chinese ports currently stand at 149 million mt. Emphasizing the current spread between scrap and iron ore costs, Alff commented that everybody wants to be a blast furnace-based steel producer for the next six months.

Producers at IREPAS: Prospects for near future do not look bright

Murat Cebecioğlu, chairman of IREPAS and also chairman of the producers committee, said that, since China is the main driving force behind the global steel industry, everybody is unfortunately taking a position according to what China is doing. He pointed out that China is shipping semis and finished steel products to almost everywhere in the world, thereby putting pressure on prices and creating a huge supply and demand imbalance, while it is becoming even tougher for everyone else to compete.

Sharing the findings of the producers committee with the conference participants, Mr. Cebecioğlu said that producers in GCC countries are a little more optimistic than those in other countries as their economies are moving in the right direction, amid new projects, in Saudi Arabia for example, which are creating demand in the market, with the construction and real estate sectors being the driving force in the GCC region. Looking at the EU, the chairman of the producers committee said that business has seemed to be at a standstill in the region for more than a year now and hardly any improvement is expected in the next six months or so. On the other hand, Turkey is stuck in terms of export opportunities, being pushed into a corner by various protectionist measures, while it cannot sell to some Asian countries which used to be its main export destinations for long products because of Chinese competition. Commenting on the global longs market in general, Cebecioğlu said, “The near future does not look bright. We will probably see the same trend unless China stops exporting.”

Turning to the current situation in China, the IREPAS chairman said that, besides reducing production, the Chinese will also have to boost domestic demand, which is slow given the problems in the Chinese real estate sector. He went on to say that just reducing production by itself will not be enough, the government should provide some stimulus program as well. Regarding Turkey’s billet imports as an alternative to scrap, he said that Turkish mills will buy less scrap, complementing their needs with billet imports from China, which means they will be producing less semis, and this situation may also exert some pressure on scrap prices.

19:00 – 22:00                   Welcome cocktail at Marriott Rive Gauche Hotel Paris

Day 2: Monday, September 16, 2024

09:15 – 09:30                  Welcome address by Chairman of IREPAS

09:30 – 11:00                   SESSION ONE – Global markets and CBAM impact

- Latest developments in the global steel market and recent trends in steelmaking capacity

Luciano Giua, Economist/Policy Analyst, The Organisation for Economic Co-operation and Development (OECD)

- Navigating the EU CBAM: Financial impacts and strategies for cost mitigation

Louis Redshaw, Ceo/Founder, Redshaw Advisors Ltd

                                           SESSION TWO – ASEAN steelmarket outlook

Moderator: Anastasiia Kononenko, Head of Market Intelligence-Asian markets, SteelOrbis

Yeoh Wee Jin, Secretary General, South Asia Iron and Steel Institute (SEAISI)

11:00 – 11:30                     Networking break

11:30 – 12:30                    SESSION THREE – Macroeconomic overview

- Evaluation of economies – in EU, US, China globally

Wars and impacts of political crises
Predictions of possible scenarios for US elections

Daniel Gros, Professor, Bocconi University / Director, Bocconi University’s Institute for European Policy Making / Advisor, European Parliament

13:00 – 14:30                    Networking lunch

14:30 – 16:30                    IREPAS Committee Meetings

• 14:30 – 16:30 IREPAS Producers Committee (by invitation only)
• 14:30 – 16:30 IREPAS Raw Material Suppliers Committee (by invitation only)
• 14:30 – 16:30 IREPAS Traders Committee (open to all attendees)

16:00 – 18:00                    Monday cocktail reception

Day 3: Tuesday, September 17, 2024

10:00 – 11:30                   SESSION FOUR – Panel with Committee Chairmen

• IREPAS Producers Committee
• IREPAS Raw Material Suppliers Committee
• IREPAS Traders Committee

At the opening of the conference, Murat Cebecioglu, chairman of IREPAS, emphasized that demand in the global long steel products market continues to lag behind supply. He added that the situation was getting worse because of China’s aggressive export policy and that Chinese exporters would continue to be aggressive, which of course would drive other Asian exporters to be aggressive also.

The IREPAS chairman said the situation in the global long steel products market is deteriorating, adding that there is huge uncertainty on what the next couple of quarters will bring for the global long products market, where it seems the situation will be extremely difficult.

On the last day of the conference, producers of long steel products, as well as traders and raw material suppliers, shared the conclusions reached at their special committee meetings regarding the current situation in the markets with the general participants at the event.

Raw Material Suppliers at IREPAS: General market mood hopeful for improvement

Jens Björkman, the chairman of the raw material suppliers committee, summarized the committee meeting findings regarding the general situation in the global steel and raw material markets, noting that the markets have been struggling this year compared to the past few years amid the worsening of economies due to high inflation and interest rates. However, he stated that the general mood is hopeful for a return to something slightly more forward-looking and optimistic.

Regarding Western countries, he stated that high interest rates and inflation have been putting pressure on scrap generation in the US and the EU, and added that the interest rates in the EU are expected to be cut during the spring. With the anticipated increase in scrap demand due to electric arc furnace investments especially in the US, Canada and Europe, Mr. Björkman noted that scrap flows will change significantly in the next 10 years, regionalizing scrap generation where scrap demand is high. In addition, he stated that steel producers have started to look for alternatives to scrap like pig iron, HBI and DRI to cover their needs for raw material. Indicating that scrap generation in Europe is down by 15-50 percent depending on the part of the region, Björkman said that, with the Carbon Border Adjustment Mechanism (CBAM), European scrap suppliers will try to keep scrap volumes within the regional market, reducing scrap exports from the region especially to Turkey, which operates mostly with electric arc furnaces and has significant demand for scrap.

Looking at China, noting that the country’s economy was expected to rebound after the Chinese New Year holiday but that these expectations did not materialize, he stated that China’s economy is going through a period of normalization. Meanwhile, pointing out that before the recent rebound iron ore prices had fallen to $100/mt CFR in the first quarter this year from the higher-than-expected level last year of $120/mt CFR, he said that the factors contributing to the price drop included high iron ore inventories at Chinese ports, slow demand and lower steel production. He concluded by saying that the market in China is adjusting to the lack of recovery of demand after the Chinese New Year holiday, adding that he expects iron ore prices to remain at quite high levels.

Traders at IREPAS: Global demand to be supplied locally, market conditions lead to regionalization

F. D. Baysal, the chairman of the traders committee, stated that there is demand globally but that it will be supplied locally, adding that ongoing trade tensions, global conflicts and political instability have changed trade routes, resulting in regionalization.

Looking at the other factors that lead to regionalization, Mr. Baysal expressed the view that the EU’s safeguard measures will be extended for another two years and that its quota volume adjustment will be minimal if any. Regarding the EU’s Carbon Border Adjustment Mechanism, he stated that it will put pressure on other countries, especially on blast furnace-based producers.

Remarking that Turkey’s export markets have been limited due to the US safeguard measures, the EU quota restrictions and the geopolitical tensions in the Middle East, the chairman of the traders committee stated that there are still some export opportunities for the country, including Syria, Iraq, eastern Europe, Africa and possibly Yemen. In addition, noting that the shipping crisis in the Red Sea has affected freight rates and container shipments a lot more than bulk shipments, shipments had to be shifted from containers to bulk, leading to additional costs.

Looking at China, Baysal said that the low steel demand in the country amid cancelled infrastructure projects has resulted in an increase in the country’s exports, with China dominating the global market with its lower prices and higher quality of steel, leading the strong competition. He also cited the Chinese Metallurgical Industry Institute’s prediction for a 1.7 percent drop in China’s steel demand in 2024, after a 3.3 percent decline in 2023, while further noting that China’s steel export volume increased by 14 percent year on year in the first quarter, though the value of its steel exports during this period was down by 20 percent year on year.

Producers at IREPAS: Low demand and Chinese exports weigh heavily on global steel market

Murat Cebecioğlu, chairman of IREPAS and also chairman of the producers committee, shared with participants the conclusions reached by producers regarding the current situation in the markets. He said that the GCC region is more optimistic in terms of business given the big infrastructure projects in the pipeline there, while market conditions in Egypt are getting better and better as the country’s currency issue has mostly been resolved, though the Suez Canal crisis remains a challenge. In some EU markets, the economy is picking up and inflation seems to be under control, while in others demand still remains quite low.

Commenting on the situation in China, the hot topic at the conference, Mr. Cebecioğlu said that Chinese exports will definitely affect the global market negatively and will reach high levels as they did back in 2015. However, this time the number of export markets is limited because of protectionism and Chinese exports will be more problematic in terms of competition. He went on to say that, apart from China, Malaysia, Indonesia and Vietnam are also exporting heavily and competing with each other. This will affect other suppliers and, as one of the biggest long steel exporters, Turkey is already feeling the effects, the chairman of the producers committee noted. Chinese exports are also taking a toll on the EU market, which is also struggling with very low demand especially in the northern part of the region.

Other exporters to the EU have to deal with quota measures as well as the Chinese competition. Cebecioğlu said the EU will most probably extend its quotas for another two years and, with new suppliers such as the GCC and North Africa, things will be tough this year before picking up and getting better next year.

Responding to a question regarding how Turkish mills managed to increase production in the first quarter of the current year, the committee chairman said that, in terms of sales, the first quarter this year was much better than the corresponding period last year. Turkish mills were able to sell considerable amounts to the EU and, with the quotas opening up, they had a window for exports. Commenting on the reconstruction works in Turkey’s southern region which was devastated by earthquakes last year, Cebecioğlu stated, “Construction activity has already started in the region, and it is mainly the mills in the region that are benefitting from all this. Since export activity is very low, this gives these mills a little bit of a break, and also funding should not be a problem as these projects are being financed by the government.”