The restricted products include reinforcing bars, wire rods and flat steel products, as well as steel pipes and fittings, profiles, iron and steel construction materials, iron-steel wire, cement, aviation and jet fuel and metal processing machinery. It was reported that the measure will remain in effect until Israel declares a ceasefire in Gaza and allows an uninterrupted flow of humanitarian aid to the Gaza Strip.

Meanwhile, in the January-February period this year, Turkey exported 49,990 mt of rebar and 11,387 mt wire rod to Israel. In the given period, Israel was Turkey’s second and fourth main market for reinforcing bar and wire rod exports, respectively.

There is still a surplus of supply and not enough demand in the global long steel products market. The profitability and margins of steel producers vary greatly between regions amid several factors such as the coronavirus outbreak and/or geopolitical issues like recent announcements relating to Israel/Palestine and Libya creating uncertainties for the future.

Full impact of coronavirus in China difficult to predict

Chinese steel production hit 996 million metric tons in 2019, which is 7.4 percent above the previous year, but exports are under control and were “only” 64 million metric tons, around five million metric tons below 2018. Spring is around the corner and China is expected to warm up after the Lunar New Year Holidays. Obviously, nobody is able to make forecasts about stoppages that may result from the coronavirus issue. The effects of the virus may be with us for a month of the Chinese lunar year. China may not be the big steady buyer that most of us in the market thought it was.

Supply increases in US market but its prices are the highest

Demand in the US market is still the same, but supply did expand with the increase of domestic production and more imports from Section 232-exempt countries. Currently, steel product prices are highest in the US, followed next by China, and with the EU in third place but for consumers of significant volumes.

Difficult 2019 for Brazil

Brazil’s steel market had a difficult year in 2019. Apparent consumption in its internal market was 20.6 million metric tons, down 2.7 percent from the previous year. Crude steel production in Brazil in 2019 came to 32.2 million metric tons, declining by 9.0 percent from 2018. Imports totaled 2.4 million metric tons, similar to 2018. Brazilian steel exports in 2019 decreased by 8.1 percent to 12.8 million metric tons due to certain antidumping and countervailing duties in main markets.

Some recovery expected in Brazilian construction sector in 2020

Brazilian slab suppliers are also facing difficulties in exporting to the US because the first quarter quota under Section 232 for semi-finished products was filled on the first day of the year. The Central Bank of Brazil estimates 1.2 percent GDP growth for 2019 and forecasts 2.2 percent growth for 2020. Having said all that, some recovery in the Brazilian construction sector is expected for this year.

EU makes quiet start to year, improvement foreseen compared to H2 2019

The EU market has made a very quiet start to the year, but at the same time everybody is forecasting a better situation compared to the second half 2019. The overcapacities in the EU still prevent prices from going up, even though imports are low as never before since most quotas have been used up and will only again become available from July 1. Importers consider the risk of importing under the “all others” quota to be too big because of the 30 percent restriction on country basis.

Demand varies across EU countries

Some EU countries have robust and good demand, while others do not. Those mills located in the countries with low demand are trying to shift as much as they can to the countries with high demand, which puts downward pressure on domestic mills’ prices. The situation in the EU market is expected to improve in the coming weeks following movements in scrap prices.

Low scrap-to-rebar price spread in Turkey in January, rebar demand still weak

The price spread – scrap to rebar price – of Turkish mills in January this year was the lowest observed since January 2019. In fact, the spread was lower only in January 2017 compared to January 2019. It looks like Turkish producers are trying to widen this spread using all of their muscle. For now, exerting downward pressure on scrap prices seems to be easier than requesting higher sales prices. In the meantime, Turkish mills have implemented more production cuts, which will of course support prices. However, the real issue is demand, which has not yet shown any signs of picking up. Therefore, margins remain low.

Scrap prices going down everywhere despite efforts to the contrary

Scrap prices are going down after attempts to manipulate them. The prices of scrap have been going down even in Asia where China is the driver of the scrap price trend. The European scrap dealers were first to drop prices to Turkey. Such decreases in scrap prices are putting even more pressure on long product prices in Turkey.

Iron ore prices likely to remain high in relation to scrap

Iron ore prices, on the other hand, are still high in relation to scrap and look like they will remain stable at around $80/mt CFR FO China main ports.

Attempts to stimulate growth in various parts of world

In general, the evolution of demand is still positive globally, while the development of the automotive and industrial markets evolution may help to support construction products. There are attempts to stimulate growth in various parts of the world. Moreover, inventory levels at present are moderate.

Positive signs from China, EU and Turkey, warm winter also helps

It is also a big positive to see Chinese steel exports under control. Furthermore, it looks like prices in the EU are slowly recovering and margins for producers are improving. Turkish producers are also trying to increase the spread, which helps the market positively, too. Last but not the least, construction activity has been continuing in the northern hemisphere due to the warm winter and there have been hardly any stoppages.

Coronavirus impacts regional demand, tensions in Middle East also a major concern

On the other hand, the coronavirus situation is a serious concern, reducing demand in China and surrounding regions, thus creating oversupply of steel in the world market. The US presidential impeachment trial and the tensions in the Middle East are also major concerns.

Very high levels of competition in most markets

Competition levels are very high in most markets and may even increase further in the second half of this year, particularly regionally. Competition is only weakening in global trade due to politically-motivated trade actions.

Markets mostly unstable but outlook generally satisfactory except for America

While the current status of the market is considered to be mostly unstable, the outlook is generally satisfactory with the exception of the American market where uncertainties contribute to an unsatisfactory environment.

DO YOU AGREE OR DISAGREE?

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US