Due the war in the Middle East, levels of uncertainty have surged in the global long steel products market. Energy prices are flying high, supply chains have been disrupted, bunker oil and freight rates are up and stocks are down. It is too early to predict the overall impact of the war. While concerns regarding deliveries of cargoes originating from regions in the East have helped push prices up in the Western markets, demand is not improving, which comes as no surprise especially when we have no clue about how long this war will continue or to what extent it might spread. Another major question is what will happen to scrap prices.

Investments to be put on hold, no panic purchases despite EU mills’ price hikes

Investments will be put on hold given the high levels of uncertainty all around. EU mills have reacted with price increases but, as the market is still waking up after the winter season, this has not resulted in panic purchases.

Imports into EU risky amid lack of regulatory clarity

Brussels’ incompetence or unwillingness to announce final CBAM regulations and how safeguard measures will be continued after June 2026 makes imports into the EU extremely risky.

Turkish mills face slow local and export demand, adjust capacity usage accordingly

In Turkey, construction activity is slow and exports are down by 20 percent compared to the same period last year. Mills are adjusting their production based on the demand they receive.

US Supreme Court gives some breathing space to importers, but new tariffs likely

The Supreme Court decision in the US against Trump’s tariffs gives a partial breather to importers. However, it will probably not be long before new tariffs will be implemented under different names.

Current market status unstable, outlook unpredictable

It is very difficult to talk about competition under the current levels of protectionism, geopolitical issues and uncertainty in the market. Under the current overall market circumstances, the current status of the market can be described as unstable with an unpredictable and unstable outlook.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US

As we approach the holiday season, the general atmosphere in the global long steel products market is still cloudy. To sum up the market situation, demand is weak everywhere, with the approach of the holiday season exacerbating this situation, while costs are rising, China is producing a little less but is still exporting. The net effect is that the supply-demand balance has not improved, it has just shifted for different reasons. Decreases in consumption globally have put demand in a weak situation, with customers not yet observing any rises in consumption on the horizon which would give them hope for brighter market prospects.

EU market more cost-driven than before, scrap supply tighter

What has changed in the market is the cost structure. Scrap supply in Europe is tighter than usual, possibly in expectation of CBAM in 2026. Combined with higher electricity prices, this has pushed prices higher even though finished steel demand has not changed. So, the market is now even more cost-driven than last month.

New EU safeguard measures give brief boost, but demand shrinking in general

We have seen some price increases and a relative rise in demand in the EU due to the announcement of new safeguard measures. However, this improvement is temporary. Demand in the EU is shrinking in general despite promised infrastructure projects and a lack of apartments. The capacities of EU producers have increased over the past 12 months again, which increases the imbalance in the market. Despite the upcoming CBAM and tougher safeguard rulings, prices in the EU have been increasing only by very small margins due to low demand. No change is in sight.

China still exports at full speed, production cuts make little difference

On the supply side, China is finally showing real production cuts. In the first 10 months of the year, China’s crude steel output amounted to 817.87 million metric tons, down 3.9 percent year on year. This is the first meaningful drop in a while and should, in theory, take some pressure off the global balance. But as long as the tonnages they actually produce continue to flow abroad, the practical impact of the reduction in output is limited. In reality, China is still exporting at full speed because their domestic consumption is dropping even further. On the other hand, the export market is more attractive for the Chinese. Any changes in the rest of the world will have little impact on Chinese exports, as hopes fade of a stimulus by Beijing to boost domestic steel consumption.

Projects put on hold in US due to high interest rates

In the US, demand is still flat. Due to year-end taxes, most stockists are trying to reduce their inventories. Buying decisions are being pushed to 2026. Infrastructure investments are slow and due to high interest rates residential and commercial construction projects are put on hold, waiting for further interest rate cuts. Imports are reduced due to high duty and competition from domestic production.

Many countries still hoping to negotiate tariff exemptions with US

Many countries are trying to find a way to negotiate with the US to gain exemptions from tariffs, especially Mexico. The EU will probably also offer a new deal to the US once its new safeguard is in place. Any exemption will of course change the dynamics of the market.

Turkey’s scrap imports decline, sensitive to increases in scrap costs

Sudden increases in scrap prices will also cause production cuts in Turkey. Turkey’s scrap imports declined by 7.3 percent to 15.23 million mt in the first 10 months of 2025. The import volumes in the corresponding periods since 2020 varied in the range of 18-20 million mt.

Great uncertainty predominates in very unstable market situation

There are factors creating tremendous uncertainty in the global longs market, such as CBAM and the awaited ruling of the US Supreme Court on the legality of Trump’s tariffs, which make future planning extremely difficult. Meanwhile, competition in the market is intense but for low volumes. Under these circumstances, the current situation in the market can be described as very unstable.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US        

Day 1: Sunday, September 28, 2025

19:00 – 22:00                   Welcome cocktail at Sofitel Munich Bayerpost

Day 2: Monday, September 29, 2025

09:15 – 09:30                  Welcome address by Chairman of IREPAS

09:30 – 11:10                  SESSION ONE – Critical changes in the global long steel markets and macroeconomic overview

- Long products market outlook

Alexander Gordienko, Export Director, Celsa Group

- Global steel scrap markets in times of uncertainty

Frank Pothen, Professor of Economics, Ernst-Abbe-Hochschule Jena

 - Future chances and challenges in the economic environment of the global steel industry

Dr. Heinz-Jürgen Büchner, Independent Commodity Consultant

11:10 – 11:40 Networking break

 11:40 – 13:00 SESSION TWO – Global Steel Market Outlook 

- Indian and ASEAN steel and scrap market outlook 

Anastasiia Kononenko, Head of Asia Intelligence Team, SteelOrbis

- Chinese steel market outlook

Jiang Li, Chief Analyst, Baosteel

- African steel market outlook (20+5)

Ramy Saleh, Chief Business Development, Export, Marketing and Sustainability Officer, El Marakby Steel

13:00 – 14:30                    Networking lunch

14:30 – 16:30                    IREPAS Committee Meetings

• 14:30 – 16:30 IREPAS Producers Committee (by invitation only)
• 14:30 – 16:30 IREPAS Raw Material Suppliers Committee (by invitation only)
• 14:30 – 16:30 IREPAS Traders Committee (open to all attendees)

16:00 – 18:00                    Monday cocktail reception

Day 3: Tuesday, September 30, 2025

10:00 – 11:30                   SESSION THREE – Panel with Committee Chairmen

• IREPAS Producers Committee
• IREPAS Raw Material Suppliers Committee
• IREPAS Traders Committee

Demand is very weak and the situation remains difficult in the global long steel products market. Mills are cutting production, protectionist measures are continuing full speed ahead, while China and other countries in the region are exporting a lot, putting pressure on prices. There is very severe competition in the market and every producer is fighting with its last penny in order to keep operating. Imports displaced by US tariffs are searching for homes, causing worldwide disruptions and any demand is contested by multiple origins.

Demand may show some improvement after the holiday season

The holiday season is over and we may observe relatively better demand in the coming months. For the last few weeks, a small price increase has been seen in Chinese domestic market, which has had a positive impact but further developments in China need to be observed. Anticipated interest rate cuts may also create a positive atmosphere in the global longs market. The price of scrap has moved sideways and the main problem is that mills are operating with no profits due to low capacity-utilization, which creates real damage for the future.

Imports still flood into Europe, summer production halts may support market balance

Imports continue to flood into Europe and demand there is weak. However, with European mills cutting production over the summer there is at least a chance of some balance returning to the market in the fourth quarter of the year. Whether this leads to a real turnaround remains to be seen. German domestic prices dropped substantially from June to August but now mills are trying to push prices back up again and recover some lost ground. Activity is still very slow, but the expectation is that September will be a better month.

Court appeals against Trump’s tariffs create further uncertainty

US President Trump has now had five of his tariff rulings challenged by courts of appeals. This will throw the market into uncertainty, more than before. It may take at least six months to have the appeals go through the court system all the way to the Supreme Court.

Domestic supply meets most demand in US longs market, prices soften a little

In the US, demand is very soft. With little to no imports, domestic supply seems to be meeting demand, which is why prices have not moved up even with the 50 percent duty on imports. On the contrary, most prices are moving down a little each week. Capacity utilization is still under 80 percent despite six months of “tariff protection”. More capacity is coming online, which means that the capacity utilization percentage will probably move down further. The market seems to be waiting for interest rate cuts. If the cut is just 0.25 percent, it will not be enough to stimulate the economy. Most stockists expect a reduction or a change in import duties, which is why they prefer to wait, instead of importing now in order to restock.

Current market is unstable and unpredictable, with an unsatisfactory outlook

Under these circumstances, the current status of the market can be described as unstable. Prices are within long-term trends, but market fundamentals and economic policies are unpredictable. The outlook of the market for the next quarter is also unstable and unsatisfactory, with weak demand and policy uncertainty pointing to continued weakness of the market.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US        

The business environment in the global long steel products market, particularly in terms of the demand and supply balance, has not improved meaningfully. Other than that, the situation has worsened as the Trump Administration’s increase of US import duties up to 50 percent caught many exporters off guard. The uncertainty created by the Trump administration by doubling tariffs is terrific for those who are protected and terrifying for those under attack. These sudden changes in duties and tariffs make exporters to the US think twice about exporting and make it very difficult to come to a decision.

Buyers wait and see as outcome of talks awaited

Rumours about talks with Mexico and Canada and other countries’ approach to the US administration to see if they can obtain an exemption in any sense have put buyers into wait-and-see mode. On the other hand, huge debates and negotiations are being carried on between suppliers, receivers, and traders about who should be responsible for the extra burden for those cargoes which arrived at US ports after tariffs were raised to 50 percent.

Importers into US face serious difficulties

Importers into the US continue to face serious challenges, especially with cargoes already on the water or ready for shipment under L/C terms. Many are forced to either absorb heavy losses or cancel shipments altogether.

Prices creep up in US due to new 50 percent tariffs, consumers frustrated

In the US, demand remains moderate, but prices have started to creep up – largely due to the protection of the newly imposed 50 percent duty on all steel imports. Despite this, domestic prices are still not strong enough to justify new import orders. Meanwhile, persistently high interest rates are discouraging new investments and slowing down construction activity. In summary, aside from a few US domestic mills benefiting from the current trade environment, most steel consumers and processors remain frustrated with the situation.

Impossible to compete with exports from China and SE Asia

Elsewhere, it is not possible to compete with exports from China and Southeast Asia. Stimulus programs to help the market in China have not been effective at all. We can assume they will keep exporting heavily, which will mainly hit the other exporters in the region.

Europe flooded with cheap imports, regional mills face high costs

The weak dollar and displaced tons from Asia have encouraged imports and so Europe is flooded with cheap imported steel, while energy costs for European mills have gone up. Buyers have taken early and extended holidays, but scrap prices stay high. European mills are not able to cover melting costs. Unless demand picks up after the summer break, production cuts are likely.

Expectations of interest rate cuts provide some glimmer of hope

There is still some hope among market players that some of the recently announced tariffs will backfire. Expected interest rate cuts may be the only positive so far. However, it seems the US Federal Reserve will wait a little longer to see the impact of tariffs on inflation. Interest rate cuts are also expected in Turkey, though demand there is still low. The only activity is seen in construction in the earthquake-hit region and in the renewal of old buildings.

Market status unstable, short-term outlook unsatisfactory

The current status of the market can be described as unstable and the competition in the market is very strong all around. It is very difficult to predict the outlook of the market under the prevailing uncertainty created in the market. The market is structurally weak. Nothing will probably drive the market during July and August until the start of September. Accordingly, the short-term outlook for the market is unsatisfactory.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US        

The global long steel products market is oversupplied and overcrowded. The situation has worsened and is now structural. The competition in the global market is predatory.  Margins are dead. The only strategy is cashflow and turnover. Whoever can ship first, wins. Whoever negotiates for $5/mt more, loses the order. Every confirmed business is a major success. Moreover, without the US market, competition may become brutal.

Latest US blanket 50 percent Section 232 duty marks unprecedented shift

The latest US decision to impose a blanket 50 percent Section 232 duty on all steel imports marks an unprecedented shift – one that severely impacts importers while handing a windfall to domestic producers. Although there was previously a similar measure targeting imports from Turkey, this universal application is unparalleled. What makes this especially jarring is its immediate enforcement, affecting cargoes due to arrive soon, offering no transition period or due process. This abruptness feels inconsistent with the values and principles we have long associated with the US marketplace – predictability, fairness, and rule of law.

New US decision cuts its market off from rest of world, importers handed long vacation

If the 50 percent Section 232 duty holds, it may ironically render the US the most expensive steel market globally, shutting it off from the world at a time when collaboration and balance are most needed. It seems importers in the US have been handed a long, scorching summer of vacation, just as they brace to absorb the financial fallout of all US-bound cargoes. These are extraordinary times and must be navigated with clarity, unity, and resolve.

Demand still weak in Europe and Turkey, with imports putting pressure on prices

Demand is still soft in the European market and imports are putting a ceiling on any potential price increases. Unless there is an actual pickup in end-user consumption, prices will hover at current levels or drop, especially if more cheap Asian billet flows in. Demand in Turkey is still lacking also, but more important is that, with the current iron ore and coal prices, there will be more supply pressure from Far Eastern and Southeast Asian suppliers. Far Eastern and Southeast Asian origin steel billet prices are going down almost every day.

Scrap-based producers falling behind in terms of costs

Scrap-based producers are getting priced out. Billet from Asia is cheaper than melting scrap. There is almost no point in running a melt-shop when you can just roll. This shift reshuffles power, as cheap billet exporters win and EAF-based mills are now considered high-cost producers.

Chinese long steel exporters start to push out Southeast Asians

Southeast Asian mills, who had dominated the market, are now being quietly pushed out by China. Chinese long product exports surged by over 100 percent year on year in the first quarter of 2025. Reduced blast furnace costs, falling domestic demand, and export subsidies mean this wave of Chinese exports will not slow as it is policy-driven, not market-driven. A serious displacement is taking place. Vietnam, Malaysia and Indonesia are all fighting for markets. Even South Korean mills, who were deemed to be bulletproof previously, are now closing lines for the first time in decades. China is stable, but prices are not going up and their steel is cheap, hoping for new export markets. Oil prices are also weak which is good for some players in the steel market, terrible for others.

Market currently very unstable, outlook unsatisfactory, seems to depend on political decisions

The market is currently very unstable. No one is making money. Everyone is quoting, but very few are actually booking orders. The outlook is unsatisfactory and seems to depend on political decisions.

OECD: Some brighter prospects in ASEAN and MENA regions

The recently published OECD Steel Outlook 2025 states, “Demand in the OECD area will remain roughly constant, while Chinese demand will decline appreciably due to the downturn in construction and structural shifts in China’s economy. Prospects are brighter in the Association of Southeast Asian Nations (ASEAN) and Middle East and North Africa (MENA) areas, where demand will grow strongly.”

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US        

The global long steel products market is currently overwhelmed by a spiral of duties and trade measures – protectionism such as has never been experienced before. The scenario for global the long steel trade is being re-written now by governments. Tariff barriers are being erected all over the world.

No one seems to know where we are heading

Because of the uncertainties created by the US administration on top of the already existing problems, the markets are now somewhat lost. As a result, pressure is very high. Unpredictable decisions by the US government can change the plans of market players overnight. It seems the US finally discovered the best method of protection by creating uncertainties and making it hard to export to the USA.

Some good news from China but it may continue to export

The news released after the national congress in China is promising. However, we still need to see if the production reductions will become a reality. It would have been great if the Chinese government reduced production as they did in 2015-16, but, since the economic situation in China is getting more and more difficult, exports are becoming increasingly important for them. They may simply not be in a position to enforce the production reductions on local governments and individual steel mills. Domestic prices in China are not encouraging and are still making exports more attractive.

Mills in EU unhappy with revised safeguard measures

Mills in the EU feel the region is lagging far behind the fast-changing landscape of international trade and that in the proposal for the revision of the EU safeguard measurers the European Commission has not proposed any defence measures against surging imports, thereby leaving the EU wide open for more imports and thus more trade measures from the US. On the other hand, importers feel lobbyists have finally found the best playground to get their ideas through, focusing on the destiny of downstream industries and consumers, while inefficient steel producers in the view of the importers continue to be subsidized. The new safeguard measures in the EU will surely force some of the countries exporting to the region to slow down.

Current unpredictability also hits steel business in US

The general steel business in the US has worsened. The current demand in the market is actually opportunistic buying in anticipation of higher duties in the future. There was already a surplus of material imported last month for the same reason. As for reinforcing bars, there is slower demand with less construction due to the market uncertainty and continued high interest rates. There is also higher competition between domestic producers in the US as there is more reinforcing bar produced than consumed at present, making it difficult for imports to compete. A flat 25 percent import tariff in the US will benefit low-cost countries. In long products the price increases in the US are lagging behind flat product price rises.

Scrap prices continue to rise, semis become a more attractive option

The markets have seen an almost $30/mt price increase for scrap during the last five to six weeks. The increases in scrap prices force EAF based mills to replace their scrap purchases with the procurement of semis. EAF-based mills are already priced out and the smart choice is semi-finished imports from Asia as evidenced by recent Turkish import statistics. It is a battle of costs right now and nothing else matters.

Market situation is unstable and highly volatile with a similar outlook

Overall, the current environment is not bright, to say the least. The level of competition in the global market is very strong, being almost at maximum levels.  The current situation in the market can be described as unstable with high volatility, with a similar outlook.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US        

The global long steel products market is currently under very strong pressure mainly because of Chinese exports, which have been increasing and not showing any signs of slowing down. We have already seen what Trump 2.0 means – uncertainty, volatility and a lack of visibility. It seems like the situation will get even worse until the dust settles and his goals are clearly understood. So far, Trump’s announcements have given rise to concerns about inflation, which will slow down interest rate cuts.

US long steel and construction segments waiting for the dust to settle

The market in the US has entered a waiting period in terms of the outcome of some of the decisions already made by the White House and others under consideration and delayed for further negotiations. New infrastructure projects are on hold, amid the government freeze on spending. Interest rates have not come down and there is no clear sign for the near future, thus delaying many projects and also purchases by would-be home buyers. Labor shortages in the construction sector are becoming a near certainty, causing delays and higher costs for construction developments. Domestic rebar producers are reluctant to increase prices for another 30 days, until there is certainty regarding the duties on Mexico. They are generally competing with each other rather than with imports, which are very light.

All eyes still on China

On the other hand, the real determining factor for rest of the world other than the US is China, simply because the US is now a separate world for the global steel market.  We all need to wait and see what China’s policy in the current year will be: will they continue with steel exports of over 100 million mt or will they slow down to help the global market to stabilize?

EU mills locked in cycle of low demand and high costs

The EU steel market is suffering from continuing low demand for long products, with European mills locked in a cycle of poor demand and high costs. The construction market in most EU countries is still very slow due to seasonal reasons but also in general due to much less demand from investors. In this context, the merger of Badische and Van Merksteijn will certainly have an impact in terms of consolidation. Meanwhile, energy prices in Europe are once again at levels not seen since 2022. The cold winter and the shortage of base load in Germany have pushed electricity and gas prices to their highest levels of the last three years, at least until the end of spring. These higher costs will force long steel producers in the EU to increase prices and to shut down more capacities in 2025. Feralpi seemed to have stopped production completely in January, while Riva Germany officially announced shutdowns to run from January 1 to March 30.

EU’s long steel import quotas quickly exhausted at start of year

The EU’s import quota for “all other countries” was exhausted on day two or three at the start of the year, with the huge volumes which were imported by Bulgaria and Romania. This means there will not be more imports from “all other countries”. Turkey and Algeria are mostly not competitive enough to attract EU importers. The price increases announced by German and Italian mills have not yet been accepted by the market but they probably will be as soon as benders have to restock, especially given the current euro/US dollar exchange rate. The very strong US dollar is another factor keeping prices low in the international market.

Protectionism is the new magic word, consumers to lose out

Protectionism seems to be the new magic word for economies worldwide. The markets are running into a spiral of protectionism in which everybody will lose out, especially the middle-class consumers and industries.

Longs mills forced to cut outputs, low profits make environmental targets unattainable

Mills in the long steel products market are forced to lower their capacity utilization rates, which will negatively affect their cost of production. There is a chain reaction of displaced export capacities due to Chinese exports. The steel industry is also suffering from a lack of profits, that makes it impossible to achieve net zero commitments.

Current market very difficult to operate in, outlook very unpredictable and unstable

Under these circumstances, the current status of the market can be described as unstable and very difficult to operate in. The outlook for the next quarter is very unpredictable and unstable.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US

The global long steel products market has mostly entered the holiday period. In many markets, business will start moving only after January 13. Many uncertain factors lie ahead for the post-holiday period, including the situation regarding Chinese exports, the actions likely to be taken by the new US administration and the difficulties faced by the steel industry in Europe.

Chinese stimulus measures so far not expected to have huge impact on exports

In the short term, the Asian markets are speculating on the positive sentiment from China, but it is hard to see how it will convert into real upward movement. It seems the Chinese government is going to make another attempt to increase liquidity to stimulate domestic demand. However, domestic prices are still very low in China and so the potential short-term impact on exporters will probably be limited and they will not change current export volumes until the Chinese steel industry slows down production. However, Chinese Premier Xi Jinping has pledged that China will meet its ambitious GDP growth target of five percent this year and remain the engine of global economic expansion, and so no production cuts would be anticipated. As a result, steel prices in the international markets, except in the US, will suffer going forward.

What are the prospects for Chinese steel exports in Q1?

The important sectors in the Chinese domestic economy, steel in general, and construction and manufacturing, are all in deflationary mode. Steel exports from China have increased during the fourth quarter. It is yet to be seen if Chinese exporters have already booked export orders for the first quarter. They may not have full export order books as demand and prices from overseas customers have fallen further and quantities are less.

Energy prices in Europe surge to 2022 levels, mills announce shutdowns

In the meantime, energy prices have surged to very high levels again in Europe, levels not seen since 2022, and mills in the region have started announcing shutdowns. Usually, this would push prices up but in the current low season we have to wait and see what happens.

Weak demand in Europe, luckily prices have not fallen even further

The market in Europe is still extremely challenging. Domestic producers are holding prices low to fight against imports and to collect any orders they can. But there is no way for them to reduce their prices further as their costs simply do not allow that. Demand is very weak. Many benders are still accepting long-term projects at price levels which do not correspond to current replacement costs. Mills are taking measures to reduce offers by working shorter hours or stopping liquid steel production for a few months. Nevertheless, it is a good sign that prices have not slid down any further despite the approach of the end of the year.

New US administration may trigger even greater difficulties for global long steel trade

Trade in the global long steel products market may enter a period of even greater difficulties with the change in the US administration. Proposed additional duties may trigger other countries to retaliate and it may soon become more difficult to trade globally.

Difficult winter anticipated for US domestic steel market

US domestic mills have been keeping prices low and are still offering discounts on already low prices. In addition, most US buyers, not trusting import price guarantees, refrain from ordering their usual quantities. Interest rates have eased a bit, but are still on the high side for investments. In short, a not so pleasant winter is expected in the US steel market. On the other hand, US domestic scrap pricing for December is expected to be down, for the first time in two decades.

Market is unstable with difficult and unpredictable outlook

Under these circumstances, the situation in the global longs market, where competition remains very tough and more local than global, may be described as unstable and complicated with a difficult unpredictable outlook.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US

The supply and demand balance in the global long steel products market is being impacted strongly by low demand and it is reasonable to expect that, if the US introduces new market protection measures, other countries will follow. There is simply not enough demand in the world for all the steel produced. Despite the overall gloomy scenario of mostly insufficient demand, on the bright side China has continued to announce measures to stimulate its economy, while the incoming Trump administration could take steps towards ending the war in Ukraine and bringing about a ceasefire in the Middle East, which would boost the steel markets.

Chinese exports to continue, impact of stimulus measures remains to be seen

The global long steel products market is looking to find ways to extricate itself from the desperate situation it is in. Unfortunately, exports from many countries, starting with China, are not helping at all. While production in China drops, its consumption declines even more, and so its exports increase. China has introduced stimulus packages and measures to resolve the problems of its weak real estate and construction sectors and excess steel production capacity. In China’s most recent stimulus package, financing of RMB 10 trillion ($1.4 trillion) will be provided to enable local governments in the country swap debts at high interest rates with debts at lower interest rates, which is intended to bolster economic activity nationwide. Nevertheless, the Chinese are on their way towards a record year of exports and will export more this year than the total steel production of the US and Canada combined. It remains to be seen whether this situation will change in 2025 under the impact of the stimuli the government has announced. China may indeed need to take further action, similar to the situation in 2016, and it is best if such action is taken before the Chinese New Year holidays.

US remains bright spot in terms of demand, India to see strong rise in steel consumption

The US remains a consistent source of demand in the world. China’s share of global exports and its trade surplus, meanwhile, have hit a new high. It is not a healthy situation and the US will be taking measures to curb Chinese exports. Looking forward to 2025, it is worth pointing out that worldsteel expects 1.2 percent growth in global steel consumption next year, with a 4.2 percent increase foreseen in developing countries, excluding China, while steel consumption in India is predicted to rise by 8.0 percent and consumption in the developed world is expected to grow by 1.9 percent. In particular, the increase foreseen for India is especially noteworthy.

EU market depressed by low demand, overwhelmed by imports

The EU is suffering from low demand and is overwhelmed by imports. Quotas expire very quickly from the day when they are opened and new exotic suppliers have been finding their way into the EU market.

Outlook for Europe and Germany deteriorates

Europe, and in particular Germany, is in a recession. Finally, all the rules and regulations imposed by the EU and the German government over recent years, combined with great geopolitical uncertainty and stagnating international economies, have hit Europe with full strength. What was expected six months ago is finally reaching the man in the street, who is now feeling that the times of non-existent unemployment are coming to an end. Investments are reduced in all fields of the economy and private spendings are at an all-time low, despite the high salary increases of the last two to three years.

Building industry experiencing a tsunami of empty order books

The building industry is experiencing a tsunami with order books as empty as they were 15 years ago. Unfortunately, no light at the end of the tunnel is anticipated in 2025. Such a consolidation in the cut and bend industry in Germany has never been seen and it seems like this is only the beginning.

All eyes on US after Trump’s re-election

After the recent US election, moves to “get America going again” are expected to be seen. Tariffs are on the table and if equally distributed they may create opportunities for the countries already struggling under the Section 232 duties. However, apart from Mexico, other exempt countries may not receive additional tariffs for their steel. Other products like automobiles, wine, etc., may be affected. China will be the biggest loser in terms of future export opportunities to the US. For this reason, it may be more aggressive in its export strategies without worrying about the global reactions. As for US steel, in the short term, US steel prices will go up with the anticipation of new duties. The easing of interest rates will also stimulate the domestic construction industry. However, the situation may level out by the second quarter next year. Additionally, on the positive side, there are hopes that the new Trump administration will focus on bringing the war in Ukraine to an end, and could also step up efforts to bring about a ceasefire in the Middle East. Such developments would have a huge impact in terms of regional security and provide a strong boost to economies and markets worldwide.

Interest rate cuts offer some hope

On the other hand, interest rate cuts have started in some economies and they may push up commodity prices further if they are continued. In particular, some Europeans are hopeful that business will pick up in 2025.

Markets undergo further fragmentation

There has been a further fragmentation of the markets. Aggressive competition is observed in open markets and fair demand in domestic markets. Competition inside the US is heating up as some products are unable to contribute to fixed costs. Mills in the EU are competing hard with each other to grab every ton available as long as their sales manage to cover their costs. Competition from imports is getting weaker and weaker in the EU as international prices do not attract buyers due to the very small advantage compared to domestic prices and with long lead times making imports too risky.

Unstable and fluctuating global market to continue to face lack of demand

Under these circumstances, the global long steel market can be described as unstable and fluctuating as there is a lack of demand. Unfortunately, the outlook for the market is not so bright, as it still points out to a continuing lack of demand and further fluctuations.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US