The overall business environment in the global long steel products market has deteriorated again. Everything is even more difficult and complexities are increasing further. Nevertheless, the apparent de-escalation of the conflict involving Iran could mark an important turning point. If geopolitical risks continue to ease, we may be approaching the bottom of the current market cycle.

International rebar market now weaker compared to one month ago

The international reinforcing bars market is now weaker than it was a month ago. Demand in the market continues to be subdued, while supply remains high, putting pressure on prices and margins. However, in addition to the positive development represented by the easing of tensions in the Middle East, some producers are heard to have begun lowering production in response to market conditions, which should help improve the supply-and-demand balance over time.

Demand hit by low confidence, more Iranian and Russian billet could depress rebar prices

It seems that the concerns and lack of confidence shown by market players, in particular by buyers, constitute the main obstacles preventing demand from improving. The price of scrap shows how confident mills are for future planning. We may see more Iranian and Russian billets in the market, which would exert further pressure on reinforcing bar prices.

Producers face higher costs of power during the hot summer season

As far as costs are concerned, with energy demand increasing amid the seasonally high temperatures, the higher price of power will also work against producers’ interests.

EU struggles to improve its GDP, domestic prices soften due to weak demand

The overall geopolitical situation is not good for investments and Europe is still struggling to improve its GDP, while energy costs and inflation are rising. In the meantime, we have entered into a new phase regarding EU imports, which will only be observed during the initial days of the new quarterly period and will then be silent for the rest of the quarter. Despite the announcement of the quota reduction by almost 50 percent well in advance, EU mills had been able to raise their prices for a while, but now their prices are falling back to where they were before, as demand is weak all over the EU.

Chinese steel exports continue to increase despite gradual decline in output

There is nothing positive in the Far East except for the gradual decrease in production in China, which, however, will not change anything in the short run. Chinese steel exports continue to increase.

US market very reliant on data centers

Capacity utilization in the US is stalling at 81 percent and domestic mills are announcing increases of US$10/nt. The driver in the US market has been data centers, which are not all 100 percent-financed or are without building permits.

Most encouraging development was the easing of tensions in Middle East

Having said all above, the most encouraging development was the easing of tensions in the Middle East. Greater regional stability could have supported a gradual recovery in economic activity and steel demand, particularly in the Gulf markets. At the same time, despite the ongoing conflict in Ukraine, there are signs of improving demand for steel products. This suggests that reconstruction needs and investment could provide support for the market once geopolitical conditions normalize. These developments had given reason for cautious optimism about the medium-term outlook. But the tension seems to be there again.

Global competition still extremely intense, few genuinely free markets remain

Competition in the global steel market remains extremely intense. Trade flows continue to be shaped by tariffs, quotas and other trade measures, resulting in fragmented regional markets. Within Europe, competition is strong due to weak demand and significant production capacities. Competition in third-country export markets is even more challenging, as suppliers from around the world compete for a shrinking number of open destinations. Today, there are relatively few genuinely free markets remaining for global steel producers.

Current market status unstable, with a very unclear outlook

Under these circumstances, the current status of the market can be described as unstable with a very unclear outlook.

DO YOU AGREE OR DISAGREE?  

PLEASE LEAVE A COMMENT AND SHARE YOUR OPINION WITH US

There were 99 representatives from 41 different producers among the 386 registered delegates from a total of 49 different countries. There were also 86 registrations representing 41 different raw material suppliers.

At the opening of the conference, Ioannis Manessis, chairman of IREPAS, said that two major conflicts – one in Ukraine and the other in Iran — have consequences for global trade in general and serious repercussions for the industry in particular. He said steel trade has been affected by both demand destruction and supply disruptions, as well as by elevated energy costs, higher freight rates and the practical difficulty of securing vessels on time to transport materials.

Mr Manessis added that protectionism continues to intensify at the same time. IREPAS chairman also said that real demand in the global long products sector remains subdued while geopolitical tensions have driven up freight, energy, and raw material costs. Combined with some degree of inventory replenishment, this has supported higher prices he concluded.

On the last day of the conference, producers of long steel products, as well as traders and raw material suppliers, shared the conclusions reached at their special committee meetings regarding the current situation in the markets with the general participants at the event.

Raw Material Suppliers at IREPAS: Tighter supply, geopolitics reshape global scrap market

Speaking at the panel session, Jens Björkman from Stena Metal International and also chairman of the raw material suppliers committee, shared the committee’s assessments of the current dynamics and difficulties in the global raw material markets. Mr. Björkman highlighted significant shifts in global market dynamics over the past year, pointing to tighter supply conditions, changing trade flows and increasing geopolitical influence on pricing and demand. One of the key developments has been the slowdown in Chinese steel output, with March production falling to the lowest monthly level in six years. This decline, linked to weaker margins and stricter controls, has supported sentiment in other regions, while iron ore prices have remained relatively firm at $105-110/mt due to supply-side constraints. India continues to stand out as a major growth market, supported by strong domestic sponge iron production. This has reduced its reliance on scrap imports, although the country could be an attractive destination, based on freight costs and pricing conditions.

The chairman of the raw material suppliers committee stated that, in Europe, safeguard measures and regulatory frameworks have reinforced protectionist dynamics, supporting intra-regional scrap demand. However, concerns persist over high energy costs and the risk of stagflation, which could weigh on longer-term demand. In the United States, stronger domestic steel production has boosted internal demand for raw materials. At the same time, the attractiveness of scrap exports has declined, particularly for high-quality grades, as supply increasingly shifts toward domestic consumption.

Mr. Björkman pointed out that Turkey has seen improved sentiment, supported by stronger steel production and demand. Reduced semis supply from Iran has increased reliance on scrap imports, pushing prices to around $410/mt, an annual high. Rising freight costs, driven by higher bunker fuel prices and disruptions of oil shipments through the Strait of Hormuz, have further supported pricing.

Mr. Björkman emphasized that there is no global surplus of scrap supply, as scrap continues to be steadily consumed. Europe exports around 19-20 million mt annually, reflecting limited domestic demand growth, but future availability may tighten due to increasing EAF adoption and regulatory constraints. Traditional importers in the Middle East may face challenges as scrap availability tightens in Europe and the US. Meanwhile, he noted, growing scrap generation and processing capacity in Asia, particularly in China and India, could gradually reshape global trade flows.

Mr. Björkman said that increasing regulatory requirements, particularly EU waste shipment rules, are expected to drive investment in sorting and processing. At the same time, tighter credit conditions and reduced availability of trade finance are adding complexity to global scrap trade. He went on to say that, despite strong pricing and demand conditions, the market outlook remains uncertain. Energy prices, economic growth and geopolitical developments continue to pose risks, while elevated oil prices at around $110 per barrel are still considered manageable for now. However, in conclusion, he commented that any deterioration in demand or purchasing power could quickly shift the market into a more challenging phase.

Traders at IREPAS: Geopolitical tensions and higher costs disrupt steel trade flows

Speaking during the panel session, Wilhelm Alff, director at Duferco and chairman of the traders committee, shared the committee’s assessment of current market conditions, highlighting weakening demand, regulatory pressures and rising geopolitical risks. Mr. Alff reminded that crude steel production in China reached around 960 million mt in 2025, while data from the first quarter of 2026 indicate that output may decline further or at best remain stable, with no clear signs of growth. In China, the sharpest drop was observed in the rebar segment, in which production fell by 12 percent, reflecting the ongoing downturn in the construction sector. The only improvement in China was the growth of more than 10 percent in iron ore inventories, mainly due to strategic stock building, highlighting the disconnect between raw material positioning and weak end-user demand.

This weakness in demand is particularly evident in Europe, where the overall economic outlook remains poor. Public spending is increasingly being redirected toward defense and social support rather than infrastructure, especially in Germany, limiting the recovery potential for steel consumption. The committee also pointed out that existing production capacity in the EU continues to exceed demand, noting that even prolonged production stoppages by major producers have had little visible impact on the market. A key concern for traders remains the implementation of the EU’s Carbon Border Adjustment Mechanism (CBAM). The committee chairman emphasized that, in the current environment, traders are advised to use default emission values when calculating CBAM costs in order to avoid risks, although this approach increases cost exposure. Uncertainty surrounding calculation methods and verification procedures continues to complicate transactions, making it essential to involve producers and clearly define contract terms.

In addition, recent changes to the EU safeguard system have added further pressure. Quotas have been reduced by nearly 50 percent, while out-of-quota duties may rise to as high as 50 percent. Market participants criticized the lack of adjustment in country-specific quotas, even where suppliers have not delivered material for extended periods. As a result, portions of the quota system remain effectively unusable, further tightening supply and negatively affecting buyers and end-users in the region. Against this backdrop, traders also highlighted the growing impact of geopolitical tensions, particularly in the Middle East. According to Mr. Alff, escalating tensions have tightened raw material supply chains and pushed costs higher, significantly slowing trading activity. Mills are increasingly relying on short-term sourcing strategies and opportunistic cargoes, while additional costs for transporting billets overland from Omani ports are estimated at around $40/mt. Severe port congestion is further complicating trade flows, making execution increasingly difficult. Despite these disruptions, the committee believes that the current situation is still being treated as temporary rather than structural. However, logistical constraints, especially in key maritime routes, continue to limit cargo movements and add uncertainty to global trade.

Commenting on global trade flows, Mr. Alff noted that exporters are likely to face growing challenges in accessing traditional markets. Tightening EU quotas and rising protectionism are forcing suppliers to seek alternative destinations, though options are becoming increasingly limited as more countries introduce similar trade barriers. Africa is expected to remain a key growth market in the medium term, supported by rising imports from Asia, particularly China, although the expansion of local production capacity and potential protectionist measures could gradually slow this trend.

Regarding China, the committee expects semi-finished steel exports to remain at elevated levels but under tighter control, as the Chinese authorities are likely to manage trade flows more actively to avoid another sharp surge. While the ongoing crisis in the Gulf region could support demand for Chinese material, its impact will largely depend on logistical conditions and the ability to move cargoes efficiently.

Looking at other regions, market conditions in the US and Latin America were described as relatively stable, with the US benefiting from solid demand driven by public infrastructure projects.

Overall, the traders committee underlined that the global steel market is entering a period of heightened uncertainty, shaped by weak demand in key regions, regulatory changes and geopolitical risks. In such an environment, Alff concluded that it is extremely difficult to predict price trends, emphasizing that market participants will need to continuously monitor developments and adjust their strategies accordingly.

Producers at IREPAS: Global steel sector under pressure from costs and weak growth

Alex Gordienko, export director of Spain’s CELSA Group and representing the producers committee, stated, in sharing the producers committee’s findings, that the global steel industry is facing increasing pressure from rising costs, weak economic growth and regulatory complexity. He noted that uncertainty remains high, particularly due to ongoing geopolitical tensions. Mr. Gordienko indicated that raw material prices have risen significantly, while the ability to pass these costs on to customers remains limited. As a result, margins across the industry are under sustained pressure, with finished steel prices failing to fully reflect higher input costs.

Mr. Gordienko noted that economic growth remains subdued across many regions, limiting the potential for a meaningful recovery in steel demand. He warned that current conditions reflect a fragile balance, with demand holding but lacking strong momentum. He described energy markets as highly volatile, largely due to tensions in the Middle East, adding that there is no clear timeline for a resolution and that a prolonged conflict could significantly worsen market conditions.

Mr. Gordienko went on to state that trade policy remains a key theme, with the EU’s Carbon Border Adjustment Mechanism (CBAM) at the center of discussions.

CBAM is seen as a mechanism that will gradually level carbon costs globally, encouraging countries such as Turkey, China and India to develop their own carbon pricing systems.

He said that, while CBAM is not expected to trigger immediate price changes, producers anticipate a medium-term disruption. By 2027, mills with verified emissions data are expected to gain a competitive advantage, as buyers increasingly prioritize suppliers able to provide reliable carbon data. Currently, only a limited number of suppliers, particularly in Japan and South Korea, are fully prepared for these requirements.

Meanwhile, the other restrictive factor, he pointed out, is that a new quota system stricter than the EU’s framework is expected to be introduced in the UK.

Mr. Gordienko commented that logistical challenges are adding further pressure, particularly in the Middle East, where port congestion is disrupting cargo flows. Limited truck availability and rising freight costs, driven by higher bunker fuel prices and fuel shortages, are increasing delivery costs for producers. He also stated that production disruptions in Iran have significantly affected global semis supply. Publicly available information indicates that facilities representing around 10 million mt of capacity have been heavily damaged, with recovery timelines ranging from six to 12 months. Iran exported approximately 3 million mt of semis in 2025, with around 75 percent directed to Asia. The disruption has contributed to increased Chinese semi-finished exports, particularly in March, as China moved to fill the supply gap. In the meantime, diesel shortages in Europe and transportation constraints are further amplifying cost pressures, with freight rates rising faster than oil prices.

On the raw materials side, Gordienko stated that availability remains a structural constraint. European producers, heavily reliant on scrap for electric arc furnace-based production, face limited flexibility in switching to alternative inputs such as HBI due to high energy requirements. This suggests limited short-term changes in production routes.

Lastly, he shared his prediction regarding the market outlook. Despite relatively stable demand and pricing conditions, the overall outlook remains uncertain. In conclusion, he said that energy prices, geopolitical developments and cost pressures continue to pose significant risks, leaving the global steel industry in a fragile and unpredictable environment.